Bluetooth® wireless scanner with advanced performance and durability

Outstanding scanning capability

Scanning from a distance of over 1 metre is possible using CCD technology (with 1.0 mm narrow bar codes).

Stable scanning of wide barcodes such as EIAJ labels or EAN128.

World-leading impact resistance

With a strong body and the use of impact-resistant rubber, the scanner can survive a 2 m drop - the highest standard in the world.

Superior environmental endurance

After many years of developing high quality technology, Denso has achieved IEC International Standards Protection Class IP54 (equivalent to JIS spash resistance), preventing water and dust from infiltrating the scanner.

Superior features

Tri-colour Extra Bright LED
Tri-colour LED display that shows operation status

Vibration Function
Scan completion confirmed by vibration

Adjustable Buzzer Volume
3 levels of buzzer volume to suit the surrounding environment

Use of magic key

LED Indicator
 

Wireless connection control
Wireless connection can be disconnected by pressing and holding the magic key for a few seconds. Reconnect simply by pressing the trigger.

Transmission of designated characters
Data that is already stored (eg operations initiation code) can be sent by switching the magic key ON.

Retransmission of scanned data
Scanned data can be retransmitted when the magic key is ON so the barcode does not need to be repeatedly scanned.

Wide Range Of Functions

Barcode comparison
Determines if the barcode being scanned matches a master bar code registered in the GT10B.

Data Editing Function
Sorts scanned barcode data and prints out only necessary data.

Connectability to a wide range of devices

Built-in Bluetooth ® wireless technology facilitates connection with a wide range of devices.

Improvement in workability with wireless connection

Because there are no cables, the GT10B can be installed anywhere (Min. 10m range, with no obstructions).

Can be connected by simply scanning the bar code underneath the communication unit, as shown on the left.

4 data-saving functions

No connection error
Multiple units can be used simultaneously by specifying where to connect.

Transmission Confirmation (planned)
Accurate data transmission possible with ACK/NAK protocol built-in.

Data Check (planned)
Error correction code included in the data helps prevent missing and substitution of the data.

Scan Lock
Prevents scanning in the event of disconnection.

Low battery warning

The buzzer sounds and the LED lights to warn of low battery voltage (planned). The orange LED will flash at 5-second intervals and the buzzer will sound 3 times.

Extended operating time

Twenty hours of operating time is possible even with a constant Bluetooth® connection (at one scan per 5 seconds).

Rapid Recharging

The battery can be charged in approx. 2.5 hrs with the exclusive charger (CH-GT10N).

Setup Software

Setup can be easily performed by printing out a one-step setup barcode sheet using the configuration software.

Configuration Software for Easy Programming

GT10B is readily available by using the QR_kbif keyboard interface software that allows easy programming without the need to create a serial communication program.