USB Cradle

This optional cradle makes it possible to transfer data and files between the DT-X7 terminal and a PC via USB interface. It requires the AD-S42120BE AC adaptor for operating power and to charge batteries installed in the terminal. See the DT-X7 Series User's Guide on page E-43.

Ethernet Cradle

This optional cradle allows download and upload of system and file data between the DT-X7 terminal and a PC via USB or LAN connection. It requires the AD-S42120BE AC adaptor for operating power and to charge batteries installed in the terminal. See the DT-X7 Series User's Guide on page E-48.

Cradle-type Battery Charger

This optional charger allows a battery pack (either HA-F20BAT or HA-F21LBAT) installed in the DT-X7 terminal to be charged without removing it from the battery compartment. It requires the AD-S15050BE AC adaptor for operating power and to charge batteries in the terminal. See the DT-X7 Series User's Guide on page E-53.

Dual Battery Charger

This optional charger allows two battery packs (either HA-F20BAT or HA-F21LBAT or any combination) to be charged at the same time. The AD-S42120BE AC adaptor, is required to power the charger. Using a single AC adaptor, multiple chargers can be built up to a maximum of three units for concurrently charging six battery packs. See the DT-X7 Series User's Guide on page E-63.

Cradle-type Dual Battery Charger

This optional charger allows two battery packs (either HA-F20BAT or HA-F21LBAT or any combination) installed in DT-X7 terminals to be charged at the same time. An AD-S60160BE or AD-S60160BU AC adaptor is required to power the charger. Using a single AC adaptor, multiple chargers can be built up to a maximum of three units for concurrently charging six battery packs. See the DT-X7 Series User's Guide on page E-57.

Hand Belt

This is an add-on option for the DT-X7 terminal. It is attached to the back of the DT-X7 to help the user securely hold the terminal. See the DT-X7 Series User's Guide on page E-69.

Bumper

This is an add-on option to give extra protection against drop impact. It is recommended to attach the bumper to the terminal prior to use, especially in harsh working environments, where a higher grade of impact resistance is required.

The HA-F90BP consists of three pieces - the bumper, high-capacity battery cover, and standard battery cover. To maximize its effectiveness, the new battery cover replaces the original battery cover that comes with the terminal.

The bumper can be used only with the DT-X7M10E and DT-X7M10R terminals.

Battery Pack

Type: Lithium-ion battery
Rated capacity: 1,100 mAh
Rated output voltage: 3.7V
Weight: approximately 28 g (1 oz)

High-capacity Battery Pack

Type: Lithium-ion battery
Rated capacity: 1,880 mAh
Rated output voltage: 3.7 V
Weight: approximately 46 g (1.6 oz)

AC Adaptor

Rated input: 100 to 240 VAC, 50/60 Hz
Rated output: 12 VDC 3.5A
Weight: approximately 270 g

AC Adaptor

Rated input: 100 to 240 VAC, 50/60 Hz
Rated output: 5 VDC 3.0 A
Weight: approximately 250 g

AC Adaptor

Rated input: 100 to 240 VAC, 50/60 Hz
Rated output: 16 VDC, 3.0 A
Weight: approximately 250 g
AD-S60160BU - For use in the USA and Canada
AD-S60160BE - For use in Europe, Asia, Oceania, Middle East, Africa, and other areas.